Basic Overview of LDAP LDAP, or Lightweight Directory Access Protocol, is an authentication protocol that is commonly used for accessing and managing information in a directory service. A directory service is a centralized database that stores information about users, groups, and other network resources. LDAP provides a standardized way for applications to access this information […]
In this blog, we will learn segment routing in MPLS (Multiprotocol Label Switching). It’s a new label-switching technology that is going to enhance the working of IP and MPLS networks. SR (Segment Routing) replaces LDP (Label Discovery Protocol) in the existing MPLS network. In a traditional MPLS network, if a service provider wants to do […]
Have you forgotten the network administrator password for the Cisco Nexus switch? If so, this tutorial can show you other ways to get it back. But before you begin the password recovery procedure, you should be informed of the following: What to Do If a Device Has Two Supervisor Modules If a device has two […]
In this blog, we are going to discuss the WLC discovery process and the configuration steps for a WLC HA SSO pair in SD-Access (SDA). You can also refer to Basic Concepts of SD-Access Wireless. The following section will be covered in this Blog: Steps for WLC Discovery via DNAC Steps for WLC HA SSO […]
Have you ever noticed that Wi-Fi Speeds can vary depending on where you are standing at the location? When you have to send an important mail or browse the web, but slow Wi-Fi connection. You can easily identify and fixed by Wi-Fi heatmap analysis. In This blog, we will know about Wi-Fi Heatmaps and wireless […]
FortiManager Security Management appliance allows managing of Fortinet Network Security devices. This blog will guide you through the initial configuration of Forti-Manager. We will see the connectivity, configuration, and deployment in detail. Contents for FortiManager Connecting to the GUI Change Management IP Upgrade Process for FortiManager FMG-2000E Change an administrator’s password: Create Read-only user Change […]
The SD-Access solution is made possible by a combination of Cisco DNA Center, the Identity Services Engine (ISE), and fabric-enabled wired and wireless device platforms. The elements of a fabric site are created using wired and wireless device platforms. A fabric site is a node with its own control plane and edge node. A fabric-mode […]
Cisco ACI (Application Centric Infrastructure) was a game-changing Software-Defined Networking (SDN) solution for data centers when it was released in 2013. Over time, there has been a critical requirement for networking companies to have an effective networking device setup approach. Cisco ACI addresses the demand for networking systems to be simple, which has become a […]
Cisco Firepower The Cisco Firepower Next-Generation Firewall (NGFW) is the first threat-focused NGFW in the industry. We can create logical devices like FTD, and ASA on Cisco Firepower. From the network to the endpoint, it provides full, unified policy management of firewall functions, application control, threat prevention, and enhanced malware protection. Perform Initial Chassis Setup […]
In the last blog, we discussed STP and how it works, types of topology change, and their effect on the network. In this, we will explain what different mechanisms are to protect STP. Types of mechanisms to protect STP are as follows: – Root Guard Loop Guard BPDU Guard BPDU Filter UDLD Root Guard It […]
